International Engine Crate
Professional engine crate designed for international shipping. Will hold any engine up to a DF series Cosworth. Fully lockable and water proof. Fork-lift friendly.
$250 fob Memphis, TN.
Billet Ralt RT-4 Engine Mounts
Custom made by Brantley Precision of Indianapolis, these billet mounts replace the weak factory units as supplied by Ralt. Comparisons are shown in the pictrure above with the factory units being uppermost. These mounts are for the Cosworth BD series engine only and will fit the standard RT-4 engine leg adaptors.
$250
New Fuel Cell for 1980 - 1982 Ralt RT-4
New (2013) Eagle fuel cell for 1980 - 1982 Ralt RT-4 with filler neck on the right hand side at the rear of the cell. Exact copy of factory unit.
$1000
Side-mount early March style FB oil pump
Early 1970's style side-mounted oil pump as fitted to Marches, Chevrons, etc of the day. Will need examination and probably rebuild.
$150
Cosworth Side-mount FB oil pump with large cannister
Early 1970's style side-mounted oil pump as fitted to Marches, Chevrons, etc of the day. Will need examination and probably rebuild.
$175 fob Memphis, TN.
NEW Formula Atlantic Center Lock Wheel Nut Assemblies
Available for Ralt RT-4 (2.125" diameter) and others at 2.250" diameter
$40.00 each
Ford Belt-drive Water Pump (Cosworth, Twin Cam)
As fitted to early style Ford-based engines. Turns freely.
$100.00
Ralt RT-4 Formula Atlantic Rear Suspension Lower Plates
Billet lower suspension bracket plates for non-outboard rear suspension RT-4s.
$50.00 each
Cosworth BDA/BDD Head Supports
3 units as supplied by Ralt which pick up the front two cam cover fixing bolts.
$50.00 each
1 unit as made by Marc Bahner which picks up the first two rows of the cam cover fixing bolts
$75.00
Standard Ralt Marc Bahner
Hewland FT-200 Spigot Housings
1 standard 2.44" spigot housing (p/n K33 on Hewland Diagram) $125.00
1 cut down spigot housing for use with alternate annular clutch cylinder $100.00
Formula Car Drive Pins
3/8 x 24 thread
.700" mounted height
.535" diameter
3/16 hex drive
$7.00 each
RAMAIR filter elements and backing plate for Weber 40DCOE
(as fit Lotus Twin Cam Engines)
4 inches tall or 2.5 inches tall
$85.00
COSWORTH DISTIBUTORS by LUCAS - NEW - #41747L - with caps
$100.00 each
Cosworth BDA/BDD Flywheel
$200.00
K & N Ralt Formula Atlantic Filter Element
5.0 x 16"
$30.00
Ralt RT-4 Rear Wing
High Downforce - Rain Wing
$300.00
HEWLAND Engine - Gearbox Adaptor
Part Number 712 16 14
Part number indicates from a March 712. Adaptor is 2.00" thick. Excellent condition
$250
Ralt RT-4 Engine - Gearbox Adaptor
Late style (Rear Rocker) Adaptor
$200
Ralt RT-4 Rear Beam
$75.00
Ralt RT-4 (1980 - 1987) Fuel Cell Cover
$75.00
Ralt RT-4 Rear Plate
$75.00
Sway Bar Linear Adjuster
$65.00
Early (1980 - 1981) Ralt RT-4 Heat Exchanger
As used on the original RT-2-derived RT-4s with twin radiators and no oil cooler
$250.00
Ralt RT-4/RT-5 Oil Cap Covers
$35 each
Ralt RT-4/RT-5 Battery Covers
$35.00 each
Ralt RT-4/RT-5 Headrests
Two styles, both for early cars with fuel filler at right rear corner of cell
Please ensure which style you want.
$75.00 each
Ralt RT-4/RT-5 Rear Drive Flanges and Axles
There are two styles: early, which uses a straight nut to hold the axle in the drive flange. and late style which uses a barrel nut to thread onto the drive flange itself. The rear axles will have different lengths of thread.
Early Style
Drive Flange with axle - $125.00 Drive Flange - $75.00
Late Style Barrel Nuts and Retaining Cups
The late style rear axles require the barrel nuts with the smaller hole. All front axles require the use of bearing retaining nuts (available below with special tool) with the larger hole
Barrel Nuts - $40.00 each
Retaining Cups - $25.00 each
Ralt RT-4/RT-5 Outer Drive Flanges with bearing carrier
$100.00 each
Ralt RT-4/RT-5 Wheel Bearings (SKF/Timken 633313)
$75.00 the pair
Ralt RT-4/RT-5 Front Stub Axles
$75.00 each
Ralt RT-4 Original Axles - 23 spline, 16.750" long
$100.00 each
Early Ralt RT-4 (1980 - 1982) Support Braces
For rear outboard suspension cars with the Tea Tray
$35.00 each with rods ends
RACEPARTS Formula Car Mirrors
$100 the pair
Ralt RT-4/RT-5 Front Uprights
There are several types of uprights for the RT-4/RT-5. These are all the later style front upright in which the upper rocker mounting bolt is vertical. (The very early cars had horizontal mounts between two ears.)
Some of these have bearings, some do not. I would suspect any bearing installed.
Care must also be taken to determine if you have a "front brake" setup (i.e. the calipers mount to the front of the upright) or a "rear brake" setup. They are interchangeable.
$250 each
Front Brake - Right Hand Side
Front Brake - Left Hand Side
Front Brake - Left Hand Side
New Castings
Rear Brake - Right Hand Side
Rear Brake - Left Hand Side
Ralt RT-4/RT-5 Rear Uprights
These uprights are designed for the early (1980 - 1982) cars with outboard rear suspension. They have spigots to attach the lower shock and sway bar mount to.
However, they will work on al later cars as well. If used on a later car the spigot can be removed and they can be used on either side. They are not normally "double handed" when used on an outboard suspension car.
$250.00 each
One Pair - Right Hand Side and Left Hand Side
Ralt RT-4/RT-5 Early Fuel Cell Cap
Standard fuel cell cap (as used on Minis)
$15.00
Ralt RT-4/RT-5 Wings and Patterns
Three new factory 1988 F3/RT-5 front wings. Also patterns for rear wings, upper and lower elements, front wings and Gurney strips.
$200.00 for the lot
Ralt RT-4/RT-5 Rear Stub Axles
Will fit early and late style outer drive flange
$40.00 each
Ralt RT-4/RT-5 Front Axle retaining nuts and Special Installation Tool
Tool used to install front retaining nuts instead of a punch.
$100.00 for 3 retaining nuts and Tool
Flame Cut Exhaust Manifold plates for any Cosworth 3 bolt system
(BD Series to DFV)
$100.00
NEW Cosworth BD Series Spark Plug wires with Extended Barrels
PPE 8mm 800 ohm spark plug wires
$100.00
Tach Drive Gearboxes
One used tach drive gearboxe with Drive Dog for Smiths cable
8:1 ratio.
$50.00
NEW CV Joint Spacers for Formula Atlantic
4 at .250" 2 at .125" 1 at .0625"
$15.00 each
NEW Ralt RT-4/RT-5 Wheel Spacers
available in .250"
$17.50 each
NEW Ralt RT-4/RT-5 Rear Wing Saddle Brackets
For Rear Wing Post
$40 the pair
Formula Car "Fat Boy" Tub Inserts
Strategically installed in the tub these inserts (using nut plates) will add about 3 inches to the hip area of your formula car.
$200 the pair
Ralt RT-4/RT-5 Front Brake Cooling Ducts
Mount to the inside of the upright
$50 the pair
ORIGINAL Ralt RT-4 "Diaper" as installed on factory cars up to 1983.
Encompasses entire rear of gearbox. Three sets, all needing repair and fitment. Needed for an exact period restoration.
$100 each or $250 all three
COMPLETE SET OF RT-4 late style WHEELS - DISPLAY ONLY
These wheels are not suitable for the track. Each has a crack or dent. They will hold air.
They are for
DISPLAY ONLY!
$200 the set
EARLY STYLE Ralt RT-4 WHEELS - 1 Front - 1 Rear
$250 the pair
Ralt RT-4/RT-5 Front Sway Bar Blades
Various lengths. Email with needs
$50 each
NEW Cosworth BD Series Head Tach Drive and Blanking Insert
Inserts that go into the Cosworth BD head at the rear covering the rear of the cams. One is blank, the other has facility to mount a mechanical tach drive - Drive included that screws into the rear of the cam. With O rings
$200
Ralt RT-4 Primary Exhaust Headers - 1.75". NO FLANGES
$100
Ralt RT-4 WIDE TRACK Front Suspension Brackets
$300
Ralt RT-4/RT-5 Noseboxes
Both of these noseboxes will fit 1980 - 1982 and 1984 - 1987 cars. They will NOT fit a 1983 car.
Both are designed for the center point wing angle adjustment although they can be used on cars with the side adjusting system. One has the adjuster mechanism installed.
$125 for nosebox without adjuster mechanism
$150 for nosebox with adjuster mechanism
